Автомобили

REPAIR OF TURBOCHARGERS

The defective turbocharger is disassembled and the reason for the breakdown is established. Then we will contact you, in order to inform you about the condition of your turbocharger and the needed repair and costs. After your approval, we will begin to repair the turbocharger.

The repair proceeds as follows: the healthy parts are being cleaned and washed of the soot, the damaged parts are being replaced with new ones. All components are being assembled and the turbo CHRA (center housing rotating assembly) will be balanced at revolutions equal to an actual operating turbocharger. The components then will be assembled to the other cleaned parts. The variable geometry and the actuator will be adjusted to factory values ​​using the FLOW BENCH machine.

We issue a warranty card for the service we performed and a report stating the reasons that led to the turbocharger failure.

Автомобили

RECYCLING OF TURBOCHARGERS

A recycled by us turbocharger is the analogue of the original. The recycling represents the replacement of all parts: new turbo CHRA cartridge, new geometry, that is mounted in the already clean housings (cold and warm part). The variable geometry and actuator are being adjusted, Настройва се променливата геометрия и актуатора, whether electronic or mechanical. We issue a warranty card for the service we provide.

ПРОФИЛАКТИКА НА ТУРБОКОМПРЕСОР

MAINTENANCE OF TURBOCHARGERS


The turbocharger is disassembled into its components. All parts are washed and cleaned with a special detergent. The center housing rotating assembly - CHRA (so called centre hub, cartridge or core) is tested for oil leakage and for vibrations. If non are existing, all components will be assembled to the already cleaned parts (cold and warm part), the actuator of the turbocharger will be adjusted to factory parameters using a FLOW BENCH machine, regardless of whether it is mechanical or electronic.
БАЛАНСИРАНЕ НА ТУРБОКОМПРЕСОР
BALANCING OF TURBOCHARGERS

The turbocharger must be precisely balanced. We have a balancing machine for precise and accurate high-speed balancing of the turbocharger core as well as a balancing machine that can perform a maximum precision balancing of rotors weighing up to 5 kg. (mainly used for heavy goods vehicles).

ЗДРАВ ТУРБОКОМПРЕСОР, ИЗПРАТЕН ЗА РЕМОНТ

IN CASE OF RECEIVING A NON DEFECTIVE TURBOCHARGER FOR REPAIR

Time and again we receive functional, defect-free turbochargers, which were send to us for repair. In this case someone from our team will contact you, in order to inform you about the eventual cause of the problem (loud noises from the turbocharger, loss of oil or another reason).  If the turbocharger is defect-free, you only have to pay the costs of inspection/ maintenance of the turbocharger.